Item Code: GS125E

Sterling Global Smart Charger 12v 5 amp, Euro plug

£120.00
( Excl VAT VAT £100.00)
 
Order in the next Hours Mins and Seconds,
To get your item delivered on Tuesday
GS125 (B/E)  Plug type: B=UK, E=Europe.  Water resistant.  Universal AC input.  Suitable for all types lead acid batteries: Wet, GEL, AGM, Calcium.  Simple 3 touch screen selections with intuitive iconic LED indications.  3 charge modes.  Microprocessor control multi stage charger.  Checks if battery is faulty.  Desulphation/equalization.  Repairs faulty batteries (if recoverable).  Thermal control.  Thermal protection.  Short circuit protected.
The AC input voltages and frequencies can range from 100V-240V & 47-64Hz.
Features and benefits of this portable charger are:
Universal AC Input (100V to 240V): can be used anywhere in the world, truly global charging.
Suitable for all types of lead acid batteries: Wet, GEL, AGM, Calcium.
Simple 3 touch screen selections with intuitive iconic LED indications.
Microprocessor control multi-stage charger with pulse absorption and float charge: Fast
charge but safe full power floating for long term operation. I.e. if you want to work on a vehicle
while charging the battery then no problem, after the battery is charged the unit will deliver up to
5A to run the interior lights, so, you can continue to work on the vehicle.
Checks if a battery is faulty. The processor can automatically identify if a battery is beyond
repair and flashes a warning light to inform you it needs replacing.
Desulphation / Equilization. Repairs faulty batteries (if recoverable). If the battery is found to
be faulty, but repairable, the unit will automatically identify the fault and inject high voltage and
short DC pulses until the battery is repaired, an LED shows the charger is on repair mode.
Defective battery identification. If, after 8 hours on the repair mode, the battery is deemed
unrepairable, then an LED will flash to inform you that the battery is beyond help and needs
replacing.
Three charge modes. When the battery is found to be suitable for a charge then the charger will
bulk charge, then pulse width absorption charge and finally float charge, the unit can then be left
on permanently.
Soft start charging. If the battery is found to be heavily depleted then the smart charger will start
at a low pulse current until the battery has reached a level where it can then absorb the full charge
power
50% power reduction mode: For small batteries under 30Ah
Cold weather: 14.8V (x2 for 24V) charge mode option.
Two interchangeable connection leads with clamps and eyelet terminals.
Thermal control, regulates charge current in hot conditions.
No connection spark, there is no output voltage until the battery is connected.
Electronic reverse polarity protection with LED warning.
40 hours time out to avoid any possible problems.
Short circuit protected.
Thermal protection, reduces power and switches off if too hot.
GS125 (B/E)  Plug type: B=UK, E=Europe.  Water resistant.  Universal AC input.  Suitable for all types lead acid batteries: Wet, GEL, AGM, Calcium.  Simple 3 touch screen selections with intuitive iconic LED indications.  3 charge modes.  Microprocessor control multi stage charger.  Checks if battery is faulty.  Desulphation/equalization.  Repairs faulty batteries (if recoverable).  Thermal control.  Thermal protection.  Short circuit protected.
The AC input voltages and frequencies can range from 100V-240V & 47-64Hz.
Features and benefits of this portable charger are:
Universal AC Input (100V to 240V): can be used anywhere in the world, truly global charging.
Suitable for all types of lead acid batteries: Wet, GEL, AGM, Calcium.
Simple 3 touch screen selections with intuitive iconic LED indications.
Microprocessor control multi-stage charger with pulse absorption and float charge: Fast
charge but safe full power floating for long term operation. I.e. if you want to work on a vehicle
while charging the battery then no problem, after the battery is charged the unit will deliver up to
5A to run the interior lights, so, you can continue to work on the vehicle.
Checks if a battery is faulty. The processor can automatically identify if a battery is beyond
repair and flashes a warning light to inform you it needs replacing.
Desulphation / Equilization. Repairs faulty batteries (if recoverable). If the battery is found to
be faulty, but repairable, the unit will automatically identify the fault and inject high voltage and
short DC pulses until the battery is repaired, an LED shows the charger is on repair mode.
Defective battery identification. If, after 8 hours on the repair mode, the battery is deemed
unrepairable, then an LED will flash to inform you that the battery is beyond help and needs
replacing.
Three charge modes. When the battery is found to be suitable for a charge then the charger will
bulk charge, then pulse width absorption charge and finally float charge, the unit can then be left
on permanently.
Soft start charging. If the battery is found to be heavily depleted then the smart charger will start
at a low pulse current until the battery has reached a level where it can then absorb the full charge
power
50% power reduction mode: For small batteries under 30Ah
Cold weather: 14.8V (x2 for 24V) charge mode option.
Two interchangeable connection leads with clamps and eyelet terminals.
Thermal control, regulates charge current in hot conditions.
No connection spark, there is no output voltage until the battery is connected.
Electronic reverse polarity protection with LED warning.
40 hours time out to avoid any possible problems.
Short circuit protected.
Thermal protection, reduces power and switches off if too hot.
Customer Reviews (0)