Alternator to Battery Charger, 12 volts, 300 amps

The Alternator to Battery charger (A2B) connects very simply to an existing alternator(s) and provides extremely fast and effective charge to the domestic/house bank (5+ times faster than a stand alone alternator). The A2B achieves this performance by pulling down the voltage on the alternator by putting a load on it. This low voltage (at high current) is amplified to a 4 stage charging profile at the domestic bank. Due to the A2Bs internal splitting system there is the option to charge the starter battery too. The starter does not get advanced charging, it simply gets a sufficient maintenance charge.
Quick and Easy Installation. This charger is effective, simple and fast to install. It transforms the output of the alternator into a sophisticated multistage charger resulting in faster and more complete charging of your house / domestic battery bank.
Multiple alternator inputs.  Numerous alternators can be fed to the input of the charger provided the total current rating does not exceed the chargers rating.  E.g. 400A charger can handle 4 x 100A alternators.
No alternator modification required. The charger is fitted between the alternator and battery(s) and, unlike conventional regulators, requires no modification or interference with the alternator whatsoever. This saves on time and bypasses any engine management systems (ECU) or warranty issues.
Over 5 times faster charging. This charger optimizes the available output of the alternator and converts it to mimic that of a mains driven 4 stage battery charger. Consequently your batteries will charge faster resulting in less engine hours and a reduction in fuel used. This charger can therefore, pay for itself within a matter of weeks.